| PART |
Description |
Maker |
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| MX574AJMWI/PRTW MX574AJMWI/PRW MX574AJMWI/PR-W |
Industry-Standard, Complete 12-Bit ADCs
|
MAXIM - Dallas Semiconductor
|
| LTC8143FNPBF LTC8143FSWPBF LTC8143FSWTRPBF LTC7543 |
Improved Industry Standard Serial 12-Bit Multiplying DACs
|
Linear Technology
|
| LTC7541AKNPBF |
Improved Industry Standard CMOS 12-Bit Multiplying DAC
|
Linear Technology
|
| MX674AUQ/883B MAXIMINTEGRATEDPRODUCTSINC-MAX174BCW |
Industry-Standard, 12-Bit ADC with Reference 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, CDIP28
|
Maxim Integrated Products, Inc.
|
| BCM5222 BCM522204 BCM5228 BCM5222-04 |
10/100BASE-TX Dual-Port Digi-PHY™ Transceiver
10/100BASE-TX DUAL-PORT DIGI-PHY TRANSCEIVER
10/100BASE-TX DUAL-PORT DIGI-PHYTM TRANSCEIVER 0/100BASE-TX双端口的DIGI - PHYTM收发
|
BOARDCOM[Broadcom Corporation.]
ETC
Electronic Theatre Controls, Inc.
|
| 30C40 |
Industry Standard Mounting
|
American Electronic Com...
|
| MAC510027-32.768KHZ-G MACF510027-32.768KHZ-G MAC51 |
Industry Standard Package
|
MMD Components
|
| IRLML0060TRPBF |
Industry-Standard Pinout
|
Infineon Technologies A...
|
| QSB10024S05 QSB10024S12 QSB10024S15 QSB10024S24 QS |
Industry Standard Packages
|
XP Power Limited
|
| IRF7103PBF-1-15 |
Industry-standard pinout SO-8 Package
|
International Rectifier
|
